Honestly, really want more levels. The idea is super and I'm EXCITED about the implementation, it must be hard work. However, the difference in gameplay between the second and third level is barely felt. It feels like there should be at least 5 difficulty levels.
Also some sort of bonus at the end is missing. When you reach the max difficulty level, and hit 100+ again, the message just repeats. As far as I'm concerned, it's missing some kind of insanity.
Not enough flexible customization for me so far. There is a problem with recognizing feet and armpits (especially with a raised arm).
Not enough custom game modes and such so far.
However, I did enjoy it VERY much. Hope for development. Respect to the author.
THIS! Getting to the max level feels underwhelming. More levels with the full black glitch text on everything would be awesome. When hitting the max level for a second time you could disable closing the program for a time or just increase the censor box sizes until your whole screen is covered if you keep disobeying, making it so you have to be good for a while to be able to see even a hint of a woman.
This is actually really enjoyable! I just got it and it seems to be working right off the bat! But there is no startup to tell you whats going on, like the punishment thing is at 75% for me right now and I had no idea what was going to happen when it hit 100. Maybe that's part of the appeal, idk. The only real concerns or improvements I could say are 2:
1. Improve the detection for hentai, it doesn't work very well with it. I'm not sure exactly how nudenet works but it seems to have trouble detecting smaller images and asses, especially anything clothed.
2. Improve the delay on the overlay. I'm not sure how big an ask this is but as of now it's quite and fails to keep the detections on the right things when I scroll.
Other than that though this is really cool! Great work!
I never explained how the game mode works. So (spoiler) the % increase when you look at women images. At 100%, you get a warning : if you stop looking immediately it goes down to 50%. Otherwise, the filter goes to higher lvl and censors more bodyparts.
The % goes down when your screen is "pure" and even faster if there are male bodyparts on your screen.
1. I hope to train a better model for 2d/hentai.
2. I'm working on a MUCH better version, it runs at 120 fps ! So scroling wont save you anymore :)
This is genuinely an incredible program! To my knowledge there exists no other real-time censoring software that works with videos in the browser, and I have been searching. Super excellent work, honestly.
After using the software for a little while, three things stuck out to me. The first is that the process of drawing new censored areas each update seems somewhat inefficient, in that it often seems unnecessary to draw new areas each update. Would it not be possible (and I say this as barely a programmer, so take my words with a grain of salt) to translate and scale the preexisting censored areas to new locations, particularly if the new area is not in much different of a spot than the previous area? I don't know if it would actually speed things up, but I figured I would throw it out there.
Secondly, could a false positive system be implemented for preexisting areas, as in could an area remain in a similar position (if we are talking about translating them rather than redrawing them; the case is even more pressing in the current redrawing model) for a set amount of time? That way, it could help to alleviate the flickering effect that currently happens when small body movements occur, or things otherwise obstruct certain body parts that are supposed to be censored. It may make censored areas linger for too long in the same screen positions, but I'd rather have that than body parts exposed when they shouldn't be. Just to reiterate, I believe that using translation rather than redrawing also helps greatly to correct this issue.
Lastly, although I think this is part of NudeNet, it seems like breasts and butts are not easily detected as such (even when clothed and with the "sexy" censoring turned on), unless they are shown head on, or without clothes or other obstructions, and even when nothing is in the way, butts are rarely registered correctly if they're not at an almost dead-on angle (i.e. they often are registered incorrectly if someone isn't bending over).
Again, excellent, excellent work. This is seriously already a game changer for me, and I couldn't be more excited to see where this goes in the future. I'd be happy to pay a chunk of change for a fully polished version of this product.
Thank you for your time and consideration!
P.S. Could we get a standard pixelation censor, pretty please?
Hi thanks a lot for your comment. It helps me know that the program don't bug for everyone. xD
I worked on a MUCH better version that run at 120 fps on my old 500$ PC ! So, that one frame delay will solve your first point.
If I understand correctly your second, I tested that. It was horrible when you scroll or minimize a window because it let boxes everywhere.
2d/hentai don't work very well, but I tested with a real woman standing and this seems to works. (butt and boobs) You had game mode off ? Anyway I plan to retrain a model with a better dataset.
The game just opens for about 10 seconds and just crashes, I don't even get to see any of the game as it just crashes. I am running this on a laptop, I am not sure if that is a problem.
Actually it says that 2 antivirus over 50 flagged it as a virus. Maybe the fact that I read the screen to detect bodies trigger this. Anyway, all the source code is available on github, so people can check and compile the game with godot and python.
Once the game is started, you can reveal a small settings window if you click on the icon in the taskbar. You have many parameters and you can disable the game mode to decide which filter you want on which body parts.
I just managed to make it work on GPU at 60fps and with much lower cpu usage. I'm considering creating a cleaner version with a good UI and more filters. I hope to release an early access in one month.
I also have to buy an other screen to test multiple monitors myself.
One of the only things I wish I could do is adjust the game mode filters. Like I wish I could customize how many levels there are and the different amount of censorship at each one. And then having the ability to attach that customized game to a code so I could share it would be fun.
I totally agree ! I was considering if I should put a game mode in the new version, but I think it's better to let the user select his own filters and then place them in a "game collection" that will switch the level. I will not have to spend time to create the "stories" and people will be able to share their collection.
Thanks for the hard work, good stuff! There's a new problem in 1.3, when I open the program censored area doesn't cover my whole screen, but only a quarter size in the centre...
I have been using it daily and really happy with the idea. Very similar to "purify" but in my opinion this here works even better, has better effects,performance and also audio.
I do not know what you have further planned but for example a more detailed cencor list would be nice so the game mode would also be extended. I really enjoy the audio hope to see updates also there.
I personally had no problems on the technical side.
I made an account here just so i can stay updated for this great work.
In my opinion there's only two things missing from this app:
1. GPU support (Use onnxruntime-gpu or onnxruntime depending on user system or config; this would also mean we could use the 640m model which should be a lot more accurate)
2. Multiple Monitor Support (Would need to be implemented after GPU support is added because a CPU would have a hard time checking multiple monitors) [ I know you don't have multiple monitors though, maybe add an experimental option to the UI and people can test it for you? 🤔 ]
Even without these 2 things, this project is still super cool! Hope you keep working on it, also have you considered making a Patreon so people can support your project?
Btw, I've also had that black screen issue and the native vulkan fix helped me too :)
EDIT: It seems to be detecting any human face as a violation regardless of whether or not it was NSFW, I checked the source-code and it seems that (when in game mode) all detections are used. It'd be awesome if we could customize it cause at the moment I get detections if any human being is on my screen meaning I can't really use my PC at all without getting a violation 😭
I know I could disable game-mode but then what fun would that be? I think the best solution would be adding game-mode difficulties. Ranging from "Any Human" to "Nudity" or something of the sort. Then also being able to specify sexuality which dictates whether males or females (or both) should be detected
Made an anonymous account just to comment on this.
This has been incredibly fun so far! My primary request is that I'd like more control over the custom censor, setting different censor types for each "body part", much like how, for instance, game mode at filter level 0 uses subliminals for faces, and glitched boxes for other parts. My secondary request is how do I give you money for this?
I ran it the issue of the overlay being a black screen. After messing around with the Source Code I was able to make it transparent again. Idk what was the problem but in Godot, Enabling Per-Pixel Transparency, Viewport Transparency in the Project Settings and changing the engine into Compatibility Mode solves the issue. idk if this will cause problems for other users or a blanket improvement.
Update: transparency is a pain. I use an ROG Ally and when I made my last comment I was hooked up to an external monitor. upon trying to use it on the handhelds display it stopped working again (overlay is a black screen). after 3 hours of troubleshooting I have once again fixed it. Setting Driver:windows in GL Compatibility to opengl3_angle seem to make the overlay transparent again. also would it be possible for the source code to be updated with the newest version? I understand that it's there to create your own censor bars but I would like to see if my fixes work on the latest version. Thanks for creating an awesome app
Thanks for your tests. On my old laptop, I had noticed that using Compatibility mode solved the black screen, but some censor effects didn't work and this created the black screen on my PC where Forward+ mode worked !
In 1.2, I activated the others options you wanted since it still works on my PC.
I have also updated the source code if you want to try things !
thanks, i just tested it and for my ROG Ally the program needs to be built in Compatibility mode, Maybe have an extra Compatibility version on the page. sadly Godot window transparency has been a big issue for awhile and i don't have much experience with Godot to help diagnose any further but i am always available to test new versions
If you try to record your screen, you won't see the censor boxes on the video (same for a screenshot). The overlay uses an "invisible mode" of Windows so the nudity detector can always see what is under the boxes.
What you ask require minors tweaks like I did to be able to create the trailer video. :D
for anyone getting the black screen thing, try turning off vulkan (nvidia control panel - manage 3d settings - vulkan/opengl present method - prefer native). this fixed it for me
I'm considering making the overlay 1 pixel smaller than the screen size, so the drivers don't try to optimize it as fullscreen. Do you think that will work ? (I can't test it myself.)
I unfortanetly also have the black screen error,it doesnt seem to react either, as i deliverately put some pictures to see if it detected them and the punishment level didnt increase, wich means that it too only sees a black screen, such a shame i really wanted to use it, will be following it so i can try the next update,
Hey! It did not no. It seems to "fix" to the one screen that is in focus when the programme is run. But it doesn't then seem able to apply the overlay properly and it is off centered.
The programme is awesome though, really looking forward to any future updates
I can confirm that it does work on other monitors but it is still having the issue of the screen overlay being black.
To clarify - my actual screen is hidden behind the censor overlay - leaving the UI of the software and black everywhere else. I can still click on things, but I can't see anything I'm clicking. The last time I'm able to see my screen is when it does the "glitch" animation which happens when clicking the "start a new game" button.
Does something else need to be opened along side "safe for beta.exe"?
Also, there was a new driver update today for nvidia, not sure if that caused it to not work.
whenever i open the program, it just covers the screen in black after the distortion effect. I can still click through it and move things on my desktop, but i cant make anything visible without closing the program.
I'm on windows 11 on a laptop, so just one screen. The first time I ran it, it only covered the screen from the bottom right corner but was still solid black in the corner. Then restarting the game made the entire screen black with the UI. The game has started correctly and I am able to interact with the screen but I can't see anything that I am doing. The game is currently stuck like this for me no matter what I do / change. (including restarting and reinstalling).
Hey, I tried on my laptop and I got the same issue (overlay is fully black). Updating my GPU (nvidia) driver solved the problem immediately, so I advise you to try this.
← Return to game
Comments
Log in with itch.io to leave a comment.
Honestly, really want more levels. The idea is super and I'm EXCITED about the implementation, it must be hard work. However, the difference in gameplay between the second and third level is barely felt. It feels like there should be at least 5 difficulty levels.
Also some sort of bonus at the end is missing. When you reach the max difficulty level, and hit 100+ again, the message just repeats. As far as I'm concerned, it's missing some kind of insanity.
Not enough flexible customization for me so far. There is a problem with recognizing feet and armpits (especially with a raised arm).
Not enough custom game modes and such so far.
However, I did enjoy it VERY much. Hope for development. Respect to the author.
THIS! Getting to the max level feels underwhelming. More levels with the full black glitch text on everything would be awesome.
When hitting the max level for a second time you could disable closing the program for a time or just increase the censor box sizes until your whole screen is covered if you keep disobeying, making it so you have to be good for a while to be able to see even a hint of a woman.
This is actually really enjoyable! I just got it and it seems to be working right off the bat! But there is no startup to tell you whats going on, like the punishment thing is at 75% for me right now and I had no idea what was going to happen when it hit 100. Maybe that's part of the appeal, idk. The only real concerns or improvements I could say are 2:
1. Improve the detection for hentai, it doesn't work very well with it. I'm not sure exactly how nudenet works but it seems to have trouble detecting smaller images and asses, especially anything clothed.
2. Improve the delay on the overlay. I'm not sure how big an ask this is but as of now it's quite and fails to keep the detections on the right things when I scroll.
Other than that though this is really cool! Great work!
Hi thank you !
I never explained how the game mode works. So (spoiler) the % increase when you look at women images. At 100%, you get a warning : if you stop looking immediately it goes down to 50%. Otherwise, the filter goes to higher lvl and censors more bodyparts.
The % goes down when your screen is "pure" and even faster if there are male bodyparts on your screen.
1. I hope to train a better model for 2d/hentai.
2. I'm working on a MUCH better version, it runs at 120 fps ! So scroling wont save you anymore :)
This is genuinely an incredible program! To my knowledge there exists no other real-time censoring software that works with videos in the browser, and I have been searching. Super excellent work, honestly.
After using the software for a little while, three things stuck out to me. The first is that the process of drawing new censored areas each update seems somewhat inefficient, in that it often seems unnecessary to draw new areas each update. Would it not be possible (and I say this as barely a programmer, so take my words with a grain of salt) to translate and scale the preexisting censored areas to new locations, particularly if the new area is not in much different of a spot than the previous area? I don't know if it would actually speed things up, but I figured I would throw it out there.
Secondly, could a false positive system be implemented for preexisting areas, as in could an area remain in a similar position (if we are talking about translating them rather than redrawing them; the case is even more pressing in the current redrawing model) for a set amount of time? That way, it could help to alleviate the flickering effect that currently happens when small body movements occur, or things otherwise obstruct certain body parts that are supposed to be censored. It may make censored areas linger for too long in the same screen positions, but I'd rather have that than body parts exposed when they shouldn't be. Just to reiterate, I believe that using translation rather than redrawing also helps greatly to correct this issue.
Lastly, although I think this is part of NudeNet, it seems like breasts and butts are not easily detected as such (even when clothed and with the "sexy" censoring turned on), unless they are shown head on, or without clothes or other obstructions, and even when nothing is in the way, butts are rarely registered correctly if they're not at an almost dead-on angle (i.e. they often are registered incorrectly if someone isn't bending over).
Again, excellent, excellent work. This is seriously already a game changer for me, and I couldn't be more excited to see where this goes in the future. I'd be happy to pay a chunk of change for a fully polished version of this product.
Thank you for your time and consideration!
P.S. Could we get a standard pixelation censor, pretty please?
Hi thanks a lot for your comment. It helps me know that the program don't bug for everyone. xD
I worked on a MUCH better version that run at 120 fps on my old 500$ PC ! So, that one frame delay will solve your first point.
If I understand correctly your second, I tested that. It was horrible when you scroll or minimize a window because it let boxes everywhere.
2d/hentai don't work very well, but I tested with a real woman standing and this seems to works. (butt and boobs) You had game mode off ? Anyway I plan to retrain a model with a better dataset.
I promise you to create a pixelate filter !
The game just opens for about 10 seconds and just crashes, I don't even get to see any of the game as it just crashes. I am running this on a laptop, I am not sure if that is a problem.
It's working on my laptop. Maybe your firewall blocks the Detector process to communicate with the Overlay.
I have already turned the anti virus off and the windows firewall and it is still not working. I am running on windows 10. :<
Is there any chance it will get a android/mobile version? If thats even possible?
I don't think Android let you get the frames of other running apps. Maybe. I would also like to test it on VR !
İt would be very nice if it could blur hentai too
It can sometimes detect anime. I will train a better detection model if I make enough money with the paid version I'm working on.
Thank you
Loving the game. Cant wait to see more custom settings and new filters
I ran the zip through virustotal and it said there was 2 trojans in the file, is this meant to happen?
Actually it says that 2 antivirus over 50 flagged it as a virus. Maybe the fact that I read the screen to detect bodies trigger this. Anyway, all the source code is available on github, so people can check and compile the game with godot and python.
Works Great for me! Running a RTX 3070 Laptop.
Hope to see more updates and customization settings for the game mode :)
OK Got it running are the settings adjustable?
Once the game is started, you can reveal a small settings window if you click on the icon in the taskbar. You have many parameters and you can disable the game mode to decide which filter you want on which body parts.
Have downloaded on Win 11
I cannot figure out how to start and set it up?
omg an update! I love your game. Do you have a discord or anything? Do you have future plans for updates?
I just managed to make it work on GPU at 60fps and with much lower cpu usage. I'm considering creating a cleaner version with a good UI and more filters. I hope to release an early access in one month.
I also have to buy an other screen to test multiple monitors myself.
You're awesome, keep it up!
One of the only things I wish I could do is adjust the game mode filters. Like I wish I could customize how many levels there are and the different amount of censorship at each one. And then having the ability to attach that customized game to a code so I could share it would be fun.
I totally agree ! I was considering if I should put a game mode in the new version, but I think it's better to let the user select his own filters and then place them in a "game collection" that will switch the level. I will not have to spend time to create the "stories" and people will be able to share their collection.
For some reason the text shows up as incomprehensible blocks to me
Do you mean the "Repeating Text" censor ? Or the "Subliminal Messages" ?
no I mean, every instance of text in the program. I think it’s an issue with the font
OK. It's a weird bug if this happen only to you. I'm using a beta version of godot so maybe it will be solved soon.
Thanks for the hard work, good stuff! There's a new problem in 1.3, when I open the program censored area doesn't cover my whole screen, but only a quarter size in the centre...
Do you have multiple monitors ? You can try to re download the 1.3 version because I patched a fix made by Galu199.
Otherwise, pls write me your GPU + windows version.
Unfortunately version 1.2 gives me a black screen, even after setting Vulkan to native and updating my drivers
Hey. Can you try the 1.3 and tell me if that solved the black screen ?
Version 1.3 works great for me
Please make updates. This is fantastic.
is it possible to feed the ai reference images? it has trouble censoring anime girls especially if they have tattoos or weird colored skin
just aa black screen for me
Can you make an android version? I'd love to have this on my phone.
I love this application!<3
I have been using it daily and really happy with the idea. Very similar to "purify" but in my opinion this here works even better, has better effects,performance and also audio.
I do not know what you have further planned but for example a more detailed cencor list would be nice so the game mode would also be extended. I really enjoy the audio hope to see updates also there.
I personally had no problems on the technical side.
I made an account here just so i can stay updated for this great work.
Thank you and good luck on furthere development.
"I made an account here just so i can stay updated for this great work"
Yes, same!
could only open it once and had the black screen error but mostly I cant even open this.
This is really cool! Thank you for making this
In my opinion there's only two things missing from this app:
1. GPU support (Use onnxruntime-gpu or onnxruntime depending on user system or config; this would also mean we could use the 640m model which should be a lot more accurate)
2. Multiple Monitor Support (Would need to be implemented after GPU support is added because a CPU would have a hard time checking multiple monitors) [ I know you don't have multiple monitors though, maybe add an experimental option to the UI and people can test it for you? 🤔 ]
Even without these 2 things, this project is still super cool! Hope you keep working on it, also have you considered making a Patreon so people can support your project?
Btw, I've also had that black screen issue and the native vulkan fix helped me too :)
EDIT: It seems to be detecting any human face as a violation regardless of whether or not it was NSFW, I checked the source-code and it seems that (when in game mode) all detections are used. It'd be awesome if we could customize it cause at the moment I get detections if any human being is on my screen meaning I can't really use my PC at all without getting a violation 😭
I know I could disable game-mode but then what fun would that be? I think the best solution would be adding game-mode difficulties. Ranging from "Any Human" to "Nudity" or something of the sort. Then also being able to specify sexuality which dictates whether males or females (or both) should be detected
Made an anonymous account just to comment on this.
This has been incredibly fun so far! My primary request is that I'd like more control over the custom censor, setting different censor types for each "body part", much like how, for instance, game mode at filter level 0 uses subliminals for faces, and glitched boxes for other parts. My secondary request is how do I give you money for this?
"how do I give you money for this" I was thinking the same thing 🤣
Will there be any updates to come?
I have many ideas of filters and features, but I'm more focused on making the app works for everyone first.
+I don't really know the ratio of people enjoying/people having bug, so I'm not sure if it's worth to update it more.
I have implemented TheSirM3's fixes and I also added multi-monitor support(only 1.0 though because the github repo is old) Link: https://mega.nz/folder/HuwEAYhL#VglMGovUATkFvrBOiwBDig
Nice ! I can't maintain multi-monitor myself because I have only 1 screen, but I have updated the github if you want.
Be careful the nudenet reduce the screen texture to max 320x320, so the detection will fail often with many screens.
Also, the purpose of ScreenRecorder.gd is to create a texture for glitched shaders, so I'm not sure it will match the way you copy screens.
Any chance of multi-monitor for ver 1.2? Seems like the GitHub is updated.
I ran it the issue of the overlay being a black screen. After messing around with the Source Code I was able to make it transparent again. Idk what was the problem but in Godot, Enabling Per-Pixel Transparency, Viewport Transparency in the Project Settings and changing the engine into Compatibility Mode solves the issue. idk if this will cause problems for other users or a blanket improvement.
Update: transparency is a pain. I use an ROG Ally and when I made my last comment I was hooked up to an external monitor. upon trying to use it on the handhelds display it stopped working again (overlay is a black screen). after 3 hours of troubleshooting I have once again fixed it. Setting Driver:windows in GL Compatibility to opengl3_angle seem to make the overlay transparent again. also would it be possible for the source code to be updated with the newest version? I understand that it's there to create your own censor bars but I would like to see if my fixes work on the latest version. Thanks for creating an awesome app
Hey !
Thanks for your tests. On my old laptop, I had noticed that using Compatibility mode solved the black screen, but some censor effects didn't work and this created the black screen on my PC where Forward+ mode worked !
In 1.2, I activated the others options you wanted since it still works on my PC.
I have also updated the source code if you want to try things !
thanks, i just tested it and for my ROG Ally the program needs to be built in Compatibility mode, Maybe have an extra Compatibility version on the page. sadly Godot window transparency has been a big issue for awhile and i don't have much experience with Godot to help diagnose any further but i am always available to test new versions
If you try to record your screen, you won't see the censor boxes on the video (same for a screenshot). The overlay uses an "invisible mode" of Windows so the nudity detector can always see what is under the boxes.
What you ask require minors tweaks like I did to be able to create the trailer video. :D
for anyone getting the black screen thing, try turning off vulkan (nvidia control panel - manage 3d settings - vulkan/opengl present method - prefer native). this fixed it for me
Holy crap it worked, thanks!
Hey, thanks for the fix !
I'm considering making the overlay 1 pixel smaller than the screen size, so the drivers don't try to optimize it as fullscreen. Do you think that will work ? (I can't test it myself.)
Version 1.1 has good new Features. But is a bit more laggy for me. The glitched filter makes my PC stutter.
Please make it, that the Game can run in the Tray and with a password for the settings and exit.
Very needed is a option to deactivate the sounds, maybe even the beginning glitch.
I unfortanetly also have the black screen error,it doesnt seem to react either, as i deliverately put some pictures to see if it detected them and the punishment level didnt increase, wich means that it too only sees a black screen, such a shame i really wanted to use it, will be following it so i can try the next update,
Do you have the most recent GPU drivers ? I got the same bug on my laptop and updating the gpu driver fixed it.
sadly yes, when i got the bug i read the comments to see if there was a solution and updated them, it didnt work unfortunately
could this be a compatibility problem with amd cards,as I tested it on an old laptop with an Nvidia graphic card and it worked
Version 1.1
- new slider to control the speed of the game
- reduce lags at startup, preventing the overlay to be on half the screen
- minor fixes
Be sure to have recent GPU drivers !
Does this work with multiple screens?
did it work for you?
Hey! It did not no. It seems to "fix" to the one screen that is in focus when the programme is run. But it doesn't then seem able to apply the overlay properly and it is off centered.
The programme is awesome though, really looking forward to any future updates
Hi, you can try the 1.1 version. That should correct the "off centered" bug when you launch the app the first time.
I don't have multiple screens so I can't test it, feel free to tell me if that works well and what changes you wish.
I can confirm that it does work on other monitors but it is still having the issue of the screen overlay being black.
To clarify - my actual screen is hidden behind the censor overlay - leaving the UI of the software and black everywhere else. I can still click on things, but I can't see anything I'm clicking. The last time I'm able to see my screen is when it does the "glitch" animation which happens when clicking the "start a new game" button.
Does something else need to be opened along side "safe for beta.exe"?
Also, there was a new driver update today for nvidia, not sure if that caused it to not work.
whenever i open the program, it just covers the screen in black after the distortion effect. I can still click through it and move things on my desktop, but i cant make anything visible without closing the program.
Same here.
I'm also getting this issue
What is your Windows version, and do you use multiple monitors ?
I'm on windows 11 on a laptop, so just one screen. The first time I ran it, it only covered the screen from the bottom right corner but was still solid black in the corner. Then restarting the game made the entire screen black with the UI. The game has started correctly and I am able to interact with the screen but I can't see anything that I am doing. The game is currently stuck like this for me no matter what I do / change. (including restarting and reinstalling).
I got the same thing on my laptop and updating the gpu driver fixed it !
Windows 11 and just one monitor. Don't know if this means anything but the scree-detect-nude says its unable to connect.
This looks like the game crashed. Are you on a very cheap cpu ? Maybe try the version 1.1 which reduce cpu usage at startup.
No, cpu usage is at about 40% max at any one time while starting the program. Still same issue with 1.1 with making sure I updated drivers.
Hey, I tried on my laptop and I got the same issue (overlay is fully black). Updating my GPU (nvidia) driver solved the problem immediately, so I advise you to try this.
my drivers are completely updated still the same
Very good! Please add a password protected Setting and a way to change the Game Mode settings, like escalation curve and effects.
Added this tool to my Profile recommendations, hope this is ok.
Thanks for your comment !
"password protected Setting" is the game asks you to type a password if you try to quit the app ?
A "xp multiplier" is ready for next version.
More like a password to change any of the settings.
And maybe a function to start minimized in System Tray on Windows Startup.
how did you get it to work?
Just start it, the First time it didn’t centered the Ui right. I closed it and tried again, then it worked.